BASF Ultrafuse® 316L is an innovative filament to produce 316L grade stainless steel parts using standard desktop 3D printers.
Note: In addition to the Dimafix 3D Printing Adhesive shown above, we also have Magigoo Metal available, which is designed specifically for BASF Ultrafuse 316L.
For the full details about this material, visit this page.
Ultrafuse® 316L is an innovative filament to produce 316L grade stainless steel parts from existing FDM desktop 3D printers.
It is designed for ultimate ease of handling on conventional Fused Filament Fabrication 3D printers. BASF Ultrafuse® 316L combines greater freedom of design with a lower total cost of ownership – printing metal parts easier, faster and affordable. Parts printed with Ultrafuse® 316L obtain their final properties, including hardness and strength, through the catalytic debinding and sintering process. The catalytic debinding technology was developed and introduced by BASF and has emerged as the industry standard.
Ultrafuse® 316L has a much lower start up cost to print functional metal parts. Due to this material being designed to run on a wide range of commercial FFF machines, the machine requirements come with a much smaller price tag than traditional metal additive machines. For example, DMLS (Direct metal laser sintering) machines can start at the $600,000 price range.
Metal filament opens many part possibilities that only additive can access. Some of these possibilities include weight reduction, part features that aren’t possible with subtractive manufacturing, and low-cost small batch production.
One other great feature of metal additive is that these parts can be manipulated in their green state while they are soft before sintering. After sinter, these parts behave/machine the same as a stock piece of 316L.
Ultrafuse® 316L is 90% 316L stainless steel powder by weight in the filament form. This metal powder is combined and mixed with the polymers Polyacetal and Polyolefin. This combination of materials is important so the material can be run on a wide range of commercial FFF machines.
316L is a stainless-steel alloy with high percentages of Chromium and Molybdenum. This aids in corrosion resistance. Having a higher corrosion resistance means this material has both rust resistance and acidic resistance. This property opens this material up to marine and aircraft applications.
Ultrafuse® 316L is also a weldable material. The lower carbon content makes 316L easier to weld. This material is also less likely to experience weld decay.
316L was created to run on a wide range of commercial FFF machines. Here are the requirements for a printer to run the 316L filament.
For detailed printing instructions, please refer to this User Guidelines document.
Keep in mind that parts will shrink anisotropically during the debinding and sintering process, so you'll want to scale your parts up in your slicing software as follows:
Nothing will impact your 3D printing results like the kind of filament you use. Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. 3D Universe offers a wide range of high-quality filaments to choose from. We provide a 100% satisfaction guarantee on all filament we sell. If you have any problems, just send back the unused portion of the spool for a full refund. Check out our filament collection...
Join our mailing list to get the Deal of the Week along with other goodies.
You will receive at most ONE very useful email per week.
Hate SPAM? We do too! We respect the privacy of our subscribers.